Simplistic and stylish, the Ultra Tempest is the definition of less is more. The off-road market is flooded with aggressive over the top designs which is not everyone’s cup of tea. The Ultra Tempest features a smooth seven-spoke design that meets towards the centre of the wheel with a slight concave. This wheel incorporates a subtle SUV style, while retaining the strength and rigidity of an off-road wheel. Being a simple design with wide gaps between the spokes means it’s very easy to clean after going on an off-road weekend away. For those who want a clean simple look, there’s no looking past the Ultra Tempest.
Nitto Terra Grappler
Nitto has been making tyres since 1949, with all-season, performance and off-road in mind. As a Japanese made tyre, they have slowly perfected the balance between on-road and off-road performance. Whether you are commuting to work, from job site to job site or towing your boat, going camping on the beach or driving through muddy terrain, the Nitto Terra Grappler G2 is designed to get you there.
The Nitto Terra Grappler G2 features the following:
- Low road noise
- Wet weather performance
- All Terrain Pattern (70% on-road; 30% off-road)
- Long Tyre Life (averaging 60,000km)
- 3 Ply Sidewall – Extra strength and resistance
The AutoCraze Lift Kit has been designed specifically for the Ford Ranger through rigorous research & development for the ultimate ride both on-road and off-road.
This kit is suited to those who drive their Ford Ranger’s daily in and round town, from job site to job site but also want the performance when taken off-road and for towing. The lift kit drastically improves handling from standard, giving the car a nice firm ride eliminating the notorious body roll that most 4WDs have.
As well as the benefits of improved handling, the AutoCraze Lift Kit will give you much more clearance for those who want to fill out their aftermarket flares and run a wide wheel & tyre setup.
The AutoCraze Lift Kit includes the following:
Front End Setup –
- 2x AutoCraze Big Bore Gas Struts 65mm Body (Made by Raw Shocks in QLD)
- 2x AutoCraze Tapered Wire Technology Coils (Developed by King Springs Australia for an increased spring rate whilst retaining ultimate comfort feel)
- Heavy Duty OEM style top strut mounts
- Front struts fully assembled for ease of install
Rear End Setup –
- 2x Rear Comfort Leaf Springs (Rated to 0-250kg load with 300kg & 500kg option available)
- Heavy Duty U-Bolts
- Polyurethane Bush Kit (with lifetime warranty)
- Greaseable shackles & front eye pins (all pivot points are greaseable)
- Tail shaft spacer to maintain correct driveline angle and reduce vibration
Natural flare for vehicle enthusiasts to look for accessories that can add up style which gives their vehicle an appealing look. Brand new pocket style fender flare that will be a great combination of elegance and functionality that best suits your Ford Ranger MKII. Designed for an easy installation process, that requires few minutes of your time, simple tools and pre-existing factory holes.
Compatible for Ford Ranger MKII / MK2 2015 onwards (Current Shape Dualcab XL, XLS, XLT, Wildtrak)
Build sturdy with high quality ABS Material
Protects from mud and debris
Durable and weatherproof
Bolt on look with no drilling to the body required
6 Piece Fender Flares
Heat gun is advised to mould the edges to flush
One year Warranty
► Rhino LED Head Light Trim Designed specifically for your PX Ford Ranger to give your vehicle the finishing touches with cosmetic black surrounding trims against your head lights, now with an added feature of LED driving lights along the surrounds. The LED lights are in-built into the trims and highlight the modern shape of the Ranger headlights. Simple to install, all you need to do is connect wiring from trim to the existing parker light wiring. Instructions included, but taking it to a professional is recommended.
Brand New Ford Ranger MKII Trims (2015+)
Suits XL, XLS, XLT, Wildtrak Models
Material: ABS Plastic with matte black colour finish
LED Light in-built along the trim.
Fitted with double sided tape against the back of the trim
2 Piece Set
To suit against factory head lights
Warranty: 12 Months
Finish off the overall look of your Ford Ranger with the Smoked LED Tail Lights. These tail lights have been developed as an OEM replacement with a direct fit which includes all electrical fittings. The black tints adds a tough look to the rear, while the red LED illuminates through giving it a modern look and a touch of class. Not only are the lights for aesthetics,it's been designed to help with increased visibility, giving off highintensity with low power wattage draw.
* Models: XL, XLS, XLT, Wildtrak (Double Cab, Super Cab, Single Cab)
* CANBUS Certified * Full LED Lights (Brake, Indicator, Reverse)
* Plug & Play direct fitment to factory mounting points
* Easy Installation
* Attractive and classy to make your Ranger tough
* Warranty 12 Months
Designed to guard your bonnet from stone chips, bugs and other unwanted
objects, the Black Ops Bonnet Protector is made from durable ABS plastic
that has been moulded to suit the bodyline in a sleek glossy finish. Adding
a unique twist to the slimline protector, the Black Ops Bonnet Protector
features a futuristic flow of design that perfectly complements the shape of
the Ranger while giving it a touch of aggression.
Compatible for models of XL, XLS, XLT, Wildtrak
Colour: Smoke Black Tinted
Comes with 3M Double sided tape and fitting kits.
Warranty: 12 Months
These Black Ops Weather Shields are designed as an added feature of comfort for your Ford Ranger. It helps to reduce that annoying sun glare, deflect wind, rain, bugs and more while you get a hit of fresh air without messing up your lady's hair.
Fits for Ford Ranger PX2 MKII 2015-2016
For Dual Cab - XL, XLS, XLT, Wildtrak Models
Includes 3M Brand Tapes Fitted
Fit application in shape
No Cutting or Drilling required
Made of Top Quality Reinforced Acrylic in Dark Smoke Colour Material
Installation: we advise all tape to be warmed up prior to install
Warranty : 12 Months
As a genuine Ford item, the Nudge Bar provides protection for the front end of your Ford Ranger. Powder coated in a Satin Black finish, the Nudge Bar is perfect for those who don’t want a full bull bar front end giving it an aggressive look. This item comes with sensors on the bar to retain the safety features available in the Wildtrak and XLT.
Introducing the 6th Generation LED Headlights, when your unwilling to compromise in performance and quality. Integrated with the latest design in Heat Pipe Technology A380 aluminium heatsink to keep low temperatures in the light units.
Fit Purpose: Ford Ranger MK2 2015+ (Low Beam)
Input Power: 22 Watts
Light efficiency: 126LM / watt
IP Rating: IP65
Light Source: Philips Luxeon MZ LED
Colour Temperature: 6000 Kelvin (Cool White)
Housing Material: American A380 Aluminium
Operating Voltage: 12v
Operating Life: 30000 Hours
Operating Temperature: -40 degrees to 80 degrees
Instant light up whilst HID requires warm up time
Easy to self install
Compared with halogen bulb, LED is 70% more energy saving, and with 3 times longer life span.
Warranty 12 Months